---

Listed is a blue centrifugal pump with 160L/min 2500W with a pressure switch. This high quality centrifugal pump is an excellent choice for improving water supply or garden irrigation. Centrifugal pump. It is equipped with a pressure switch that regulates the pressure. The centrifugal pump has a measuring device that makes it easier to read the pressure on the gauge. Hydraulic centrifugal pumps. The maximum flow is 160 l/min, which can transport a lot of water in a short time. Thanks to the powerful motor, the pump is very robust. Thanks to the reinforced stainless steel construction, this durable jet pump is weather-resistant. ✤ Centrifugal pump with pressure switch for drinking water, robust housing, junction box with switch and power connection, hose or pipe connection thread (top), integrated motor heat protection switch for pipes increase, water supply and drainage, an excellent choice for improving the water supply of the home or garden irrigation. Our water jet centrifugal pumps are commonly used to increase pipes and water supply. It can also be used for water supply and drainage in agriculture or gardens, hotels, cafeterias, factories, mines and skyscrapers. › See more product details; Product description Product specifications: Product: centrifugal pump. Material: stainless steel and cast iron. Power supply: plug type Pump type: MC-2200. Color: Blue Voltage: 230 V / 50 Hz. Power: 2500 W / 3.0 HP. Speed: 2850 rpm. Maximum flow rate: 4 cubic meters/hour (66.7 L/min) Maximum lifting height: 100 m. Connection between suction and pressure side 2.54 cm (1 inch). Protection level: IP44. Package size: 62 x 26 x 20 cm. Total weight: 12.8 kg. Package includes: 1 x Centrifugal Pump with Pressure Switch 1 x Product Description Note: Please read the product description carefully before you start installing the pump! ! ! If possible, place the pump near the fountain to maintain maximum flow. Pay attention to the suction height. Provide a check valve for the suction line to ensure that the water column is present. Fill the pump and suction line with water before starting, otherwise the pump may run empty. The diameter of the suction line should be 1 - 1 1/4 inches, but not smaller or higher. Otherwise, the pump will not be able to deliver the proper performance or pressure.; Product description Product specifications: Product: centrifugal pump. Material: stainless steel and cast iron. Power supply: plug type Pump type: MC-2200. Color: Blue Voltage: 230 V / 50 Hz. Power: 2500 W / 3.0 HP. Speed: 2850 rpm. Maximum flow rate: 4 cubic meters/hour (66.7 L/min) Maximum lifting height: 100 m. Connection between suction and pressure side 2.54 cm (1 inch). Protection level: IP44. Package size: 62 x 26 x 20 cm. Total weight: 12.8 kg. Package includes: 1 x Centrifugal Pump with Pressure Switch 1 x Product Description Note: Please read the product description carefully before you start installing the pump! ! ! If possible, place the pump near the fountain to maintain maximum flow. Pay attention to the suction height. Provide a check valve for the suction line to ensure that the water column is present. Fill the pump and suction line with water before starting, otherwise the pump may run empty. The diameter of the suction line should be 1 - 1 1/4 inches, but not smaller or higher. Otherwise, the pump will not be able to deliver the proper performance or pressure.; Product specifications: Product: centrifugal pump. Material: stainless steel and cast iron. Power supply: plug type Pump type: MC-2200. Color: Blue Voltage: 230 V / 50 Hz. Power: 2500 W / 3.0 HP. Speed: 2850 rpm. Maximum flow rate: 4 cubic meters/hour (66.7 L/min) Maximum lifting height: 100 m. Connection between suction and pressure side 2.54 cm (1 inch). Protection level: IP44. Package size: 62 x 26 x 20 cm. Total weight: 12.8 kg. Package includes: 1 x Centrifugal Pump with Pressure Switch 1 x Product Description Note: Please read the product description carefully before you start installing the pump! ! ! If possible, place the pump near the fountain to maintain maximum flow. Pay attention to the suction height. Provide a check valve for the suction line to ensure that the water column is present. Fill the pump and suction line with water before starting, otherwise the pump may run empty. The diameter of the suction line should be 1 - 1 1/4 inches, but not smaller or higher. Otherwise, the pump will not be able to deliver the proper performance or pressure.