DĖMESIO! Išvertė kompiuterinis vertėjas.
Each channel can be set as a detection (trigger) Input capture (trigger) function 5 channel input, synchronous display Automatic amplitude measurement, 4 measuring modes optional Can set rising or falling edge detection signal (trigger signal). Capture (trigger) signal level adjustable. Data can be stored on the computer, automatically transferred to the stored data when the software is started. Data can be backed up, and later at any time to display the waveform of the backup data. Can display any channels of the differential signal Lock signal for expanding and compressing waveforms up to 93 hours; suitable for long-term monitoring of the operation of electrical devices and archiving; suitable for collecting and archiving data such as temperature, humidity and light for a long time; Product description Fossthiroy Wireless communication: Wi-Fi 2.4G Interface Type: Micro USB 2.0 Signal input interface type: BNC interface, connected to the oscilloscope probe line Maximum sampling rate: 150 kHz. Operating voltage: 5V micro USB interface power supply Power Consumption: Less than 170mA Measurable frequency range: 0Hz-----50kHz. Amplitude setting range: 10mV/-----1V/ Input impedance: 1 MOhm (less than 0.5 V/); 330 (greater than 0.5 V/). Maximum measuring voltage: ±8 V, ± 80 V for probe X10. Amplitude error: ±2.5%. Time domain range: 100 uS/-----10800 S/ Data Recording and Memory Depth: 8388608 x 5 Maximum time to record and save data: 93 hours Connection method: The Fosc53B oscilloscope has three connection methods, the software can automatically select the connection mode: 1. Use a USB cable to connect the oscilloscope to the computer. If the computer does not have Wi-Fi and cannot connect to the network, this connection mode will be adopted. This connection method requires the installation of a USB driver on the computer. Colour: as shown. Material: plastic. Package Content: 1 x Fosc-53B. 1 x USB data cable. 5 x BNC connectors. Only the above package content, other products are not included. Note: Due to the light reflection and monitor settings, the colour of the item in the photos may be slightly different. The allowed measurement error is +/- 1-3 cm.; Product description Fossthiroy Wireless communication: Wi-Fi 2.4G Interface Type: Micro USB 2.0 Signal input interface type: BNC interface, connected to the oscilloscope probe line Maximum sampling rate: 150 kHz. Operating voltage: 5V micro USB interface power supply Power Consumption: Less than 170mA Measurable frequency range: 0Hz-----50kHz. Amplitude setting range: 10mV/-----1V/ Input impedance: 1 MOhm (less than 0.5 V/); 330 (greater than 0.5 V/). Maximum measuring voltage: ±8 V, ± 80 V for probe X10. Amplitude error: ±2.5%. Time domain range: 100 uS/-----10800 S/ Data Recording and Memory Depth: 8388608 x 5 Maximum time to record and save data: 93 hours Connection method: The Fosc53B oscilloscope has three connection methods, the software can automatically select the connection mode: 1. Use a USB cable to connect the oscilloscope to the computer. If the computer does not have Wi-Fi and cannot connect to the network, this connection mode will be adopted. This connection method requires the installation of a USB driver on the computer. Colour: as shown. Material: plastic. Package Content: 1 x Fosc-53B. 1 x USB data cable. 5 x BNC connectors. Only the above package content, other products are not included. Note: Due to the light reflection and monitor settings, the colour of the item in the photos may be slightly different. The allowed measurement error is +/- 1-3 cm.; Fossthiroy Wireless communication: Wi-Fi 2.4G Interface Type: Micro USB 2.0 Signal input interface type: BNC interface, connected to the oscilloscope probe line Maximum sampling rate: 150 kHz. Operating voltage: 5V micro USB interface power supply Power Consumption: Less than 170mA Measurable frequency range: 0Hz-----50kHz. Amplitude setting range: 10mV/-----1V/ Input impedance: 1 MOhm (less than 0.5 V/); 330 (greater than 0.5 V/). Maximum measuring voltage: ±8 V, ± 80 V for probe X10. Amplitude error: ±2.5%. Time domain range: 100 uS/-----10800 S/ Data Recording and Memory Depth: 8388608 x 5 Maximum time to record and save data: 93 hours Connection method: The Fosc53B oscilloscope has three connection methods, the software can automatically select the connection mode: 1. Use a USB cable to connect the oscilloscope to the computer. If the computer does not have Wi-Fi and cannot connect to the network, this connection mode will be adopted. This connection method requires the installation of a USB driver on the computer. Colour: as shown. Material: plastic. Package Content: 1 x Fosc-53B. 1 x USB data cable. 5 x BNC connectors. Only the above package content, other products are not included. Note: Due to the light reflection and monitor settings, the colour of the item in the photos may be slightly different. The allowed measurement error is +/- 1-3 cm.