---

Note: you may receive the product with a different packaging from the picture in blue packaging. This packaging is also the authentic Seogol brand and does not affect your use. PERFECT GIFT IDEA - Use our Waterslide paper to make an individual gift. Through your own design of the water slide sticker paper with inkjet printer, printing photos, logos, stickers, designs, labels, artwork for birthday gifts, office gifts, Christmas ideas, Valentine's Day, anniversary, graduation, etc. . TEST YOUR CREATIVITY: Our water slide paper can be used on ceramic, bamboo, paper, jade, metal, glass and plastics etc. Water slide paper prints any picture, photos, artwork, wild animals or natural beauty and place it on your favourite cup, furniture, phone etc. It can be a perfect gift HIGHEST QUALITY PAPER - Our Waterslide Paper is the highest quality A4 size clear transfer paper on the market. Water sliding paper with 5760 dpi, offers the highest colour quality and presentation. No fading and excellent colour reproduction. EASY TO USE - Our inkjet stickers are easy to use. All you need is an inkjet printer and acrylic spray. Waterslide inkjet paper clear print with a heavier paper setting, seal the image with a spray, immerse it in water and apply it. Before immersing in water, all inkjet skid stickers must be sealed, otherwise the ink will pass through. Instructions included in the product English language not guaranteed). › See more product details; Product description -----Package includes waterslide decal paper inkjet: A4 Sizes 20 x Water Slide Sticker Paper ----Suitable for: Ceramic, glass, jade, candles, wood, metal, nail, plastic, bamboo, marble and more. ----- Instructions for using water slide paper: Step 1: Print image and acrylic spray: print the image from an inkjet printer. After printing, allow the paper to dry naturally for at least 3 minutes or with a hair dryer. Place the printed paper and acrylic spray in a well-ventilated room. Spray an even layer of acrylic spray over your image. Leave to dry for a few minutes. Apply two more coats to get a total of three coats. Let the paper dry naturally or with a hair dryer for at least 10 minutes. Step 2: Cut out the picture: Use scissors to cut out the desired picture. Do not cut too close to the edge of the picture, allow a distance of 1~2 mm. (Please finish the transfer within 24 hours after printing. Step 3: Transfer and Separate: Dip the paper into the water for 30~60 seconds to separate the base paper and transfer membrane. Remove the paper from the water and then quickly apply it to the ideal position of your clean sticker surface, press firmly to secure the transfer. Step 4: Remove air bubbles and water: After positioning the paper, use your fingers, a damp cloth/paper towel or a mini squeegee to remove air bubbles and excess water, then slide off the back. It should slide easily. Gently dab excess water. Step 5: Bake and Dry: Leave the sticker for at least 3 hours and dry. Do not expose it directly to sunlight during this time. Ceramic must be baked in the oven at 110°C for 10-15 minutes. Take out the ceramic and let it dry naturally after baking. You need to stand for 3 days to strengthen the colour fixation. (Note: Do not expose to direct sunlight during the production of time, ceramics are not dishwasher safe and must be gently cleaned by hand.; Product description -----Package includes waterslide decal paper inkjet: A4 Sizes 20 x Water Slide Sticker Paper ----Suitable for: Ceramic, glass, jade, candles, wood, metal, nail, plastic, bamboo, marble and more. ----- Instructions for using water slide paper: Step 1: Print image and acrylic spray: print the image from an inkjet printer. After printing, allow the paper to dry naturally for at least 3 minutes or with a hair dryer. Place the printed paper and acrylic spray in a well-ventilated room. Spray an even layer of acrylic spray over your image. Leave to dry for a few minutes. Apply two more coats to get a total of three coats. Let the paper dry naturally or with a hair dryer for at least 10 minutes. Step 2: Cut out the picture: Use scissors to cut out the desired picture. Do not cut too close to the edge of the picture, allow a distance of 1~2 mm. (Please finish the transfer within 24 hours after printing. Step 3: Transfer and Separate: Dip the paper into the water for 30~60 seconds to separate the base paper and transfer membrane. Remove the paper from the water and then quickly apply it to the ideal position of your clean sticker surface, press firmly to secure the transfer. Step 4: Remove air bubbles and water: After positioning the paper, use your fingers, a damp cloth/paper towel or a mini squeegee to remove air bubbles and excess water, then slide off the back. It should slide easily. Gently dab excess water. Step 5: Bake and Dry: Leave the sticker for at least 3 hours and dry. Do not expose it directly to sunlight during this time. Ceramic must be baked in the oven at 110°C for 10-15 minutes. Take out the ceramic and let it dry naturally after baking. You need to stand for 3 days to strengthen the colour fixation. (Note: Do not expose to direct sunlight during the production of time, ceramics are not dishwasher safe and must be gently cleaned by hand.; -----Package includes waterslide decal paper inkjet: A4 Sizes 20 x Water Slide Sticker Paper ----Suitable for: Ceramic, glass, jade, candles, wood, metal, nail, plastic, bamboo, marble and more. ----- Instructions for using water slide paper: Step 1: Print image and acrylic spray: print the image from an inkjet printer. After printing, allow the paper to dry naturally for at least 3 minutes or with a hair dryer. Place the printed paper and acrylic spray in a well-ventilated room. Spray an even layer of acrylic spray over your image. Leave to dry for a few minutes. Apply two more coats to get a total of three coats. Let the paper dry naturally or with a hair dryer for at least 10 minutes. Step 2: Cut out the picture: Use scissors to cut out the desired picture. Do not cut too close to the edge of the picture, allow a distance of 1~2 mm. (Please finish the transfer within 24 hours after printing. Step 3: Transfer and Separate: Dip the paper into the water for 30~60 seconds to separate the base paper and transfer membrane. Remove the paper from the water and then quickly apply it to the ideal position of your clean sticker surface, press firmly to secure the transfer. Step 4: Remove air bubbles and water: After positioning the paper, use your fingers, a damp cloth/paper towel or a mini squeegee to remove air bubbles and excess water, then slide off the back. It should slide easily. Gently dab excess water. Step 5: Bake and Dry: Leave the sticker for at least 3 hours and dry. Do not expose it directly to sunlight during this time. Ceramic must be baked in the oven at 110°C for 10-15 minutes. Take out the ceramic and let it dry naturally after baking. You need to stand for 3 days to strengthen the colour fixation. (Note: Do not expose to direct sunlight during the production of time, ceramics are not dishwasher safe and must be gently cleaned by hand.