---

The pump can be used for a variety of hydraulic devices. When the pump is equipped with other hydraulic tools, it can be used for various tasks such as lifting, pressing, bending, straightening, cutting, assembly and disassembly. Reduce manual work and maximise work efficiency. Punching Machine, Bending Machine, Jack Split Hydraulic Products Working mode: manual valve controls oil return Package includes: 1 x electric powered hydraulic pump; 1 x oil hose (1.8 m); 1 x quick coupling › See more product details; Product description Specifications: Input voltage: AC 220V 50Hz. Flow rate: 0.6L/min (>7Mpa) - 5L/min (<7Mpa). Working pressure: 290 psi - 10152 psi (2 Mpa - 70 Mpa). Oil capacity: 7 litres. Motor power: 750 W. Motor speed: 1400 rpm. Machine size: 25 x 32.5 x 50 cm. Weight: 21.5 kg. Total weight: 22.89 kg. Package includes: 1 x electrically powered hydraulic pump. 1 x oil hose (1.8 m). 1 x quick coupling. Instruction manual (English language not guaranteed). 1. Open the filler before use, the electric pump and power connections before oiling, then press the black button next to the engine to open, press the manual operation switch (Up), after a few air pressure, press the manual operation switch (down), turn on the motor, connected to hoses. (The pressure should not exceed 63 MPa when air pressure to avoid damage) 2. Open the motor after the pump is connected to the equipment, and adjust the operating valve to the pressure position after the motor has rotated for 1-2 minutes. At this moment, the hydraulic oil comes into the cylinder to perform the work, and the power of the hydraulic oil increases with the load on its own booster up to 63 MPa. 3. The oil pump has a regular working temperature between 10℃~50℃, if the oil temperature is ≥70℃, should stop after continuous work under high pressure, let it cool itself before use. 4. The pressure of the relief valve and safety valve has been set before the pump leaves the factory. The user cannot arbitrarily increase the pressure, but only reduce according to the actual working pressure, which can improve the service life of the pump station. 5. The motor must have reliable grounding.; Product description Specifications: Input voltage: AC 220V 50Hz. Flow rate: 0.6L/min (>7Mpa) - 5L/min (<7Mpa). Working pressure: 290 psi - 10152 psi (2 Mpa - 70 Mpa). Oil capacity: 7 litres. Motor power: 750 W. Motor speed: 1400 rpm. Machine size: 25 x 32.5 x 50 cm. Weight: 21.5 kg. Total weight: 22.89 kg. Package includes: 1 x electrically powered hydraulic pump. 1 x oil hose (1.8 m). 1 x quick coupling. Instruction manual (English language not guaranteed). 1. Open the filler before use, the electric pump and power connections before oiling, then press the black button next to the engine to open, press the manual operation switch (Up), after a few air pressure, press the manual operation switch (down), turn on the motor, connected to hoses. (The pressure should not exceed 63 MPa when air pressure to avoid damage) 2. Open the motor after the pump is connected to the equipment, and adjust the operating valve to the pressure position after the motor has rotated for 1-2 minutes. At this moment, the hydraulic oil comes into the cylinder to perform the work, and the power of the hydraulic oil increases with the load on its own booster up to 63 MPa. 3. The oil pump has a regular working temperature between 10℃~50℃, if the oil temperature is ≥70℃, should stop after continuous work under high pressure, let it cool itself before use. 4. The pressure of the relief valve and safety valve has been set before the pump leaves the factory. The user cannot arbitrarily increase the pressure, but only reduce according to the actual working pressure, which can improve the service life of the pump station. 5. The motor must have reliable grounding.; Specifications: Input voltage: AC 220V 50Hz. Flow rate: 0.6L/min (>7Mpa) - 5L/min (<7Mpa). Working pressure: 290 psi - 10152 psi (2 Mpa - 70 Mpa). Oil capacity: 7 litres. Motor power: 750 W. Motor speed: 1400 rpm. Machine size: 25 x 32.5 x 50 cm. Weight: 21.5 kg. Total weight: 22.89 kg. Package includes: 1 x electrically powered hydraulic pump. 1 x oil hose (1.8 m). 1 x quick coupling. Instruction manual (English language not guaranteed). 1. Open the filler before use, the electric pump and power connections before oiling, then press the black button next to the engine to open, press the manual operation switch (Up), after a few air pressure, press the manual operation switch (down), turn on the motor, connected to hoses. (The pressure should not exceed 63 MPa when air pressure to avoid damage) 2. Open the motor after the pump is connected to the equipment, and adjust the operating valve to the pressure position after the motor has rotated for 1-2 minutes. At this moment, the hydraulic oil comes into the cylinder to perform the work, and the power of the hydraulic oil increases with the load on its own booster up to 63 MPa. 3. The oil pump has a regular working temperature between 10℃~50℃, if the oil temperature is ≥70℃, should stop after continuous work under high pressure, let it cool itself before use. 4. The pressure of the relief valve and safety valve has been set before the pump leaves the factory. The user cannot arbitrarily increase the pressure, but only reduce according to the actual working pressure, which can improve the service life of the pump station. 5. The motor must have reliable grounding.