---

The package includes 4 ADS-B antennas, 3 RF cables, 2 RF adapters, 2 optional heatsinks and 2 NESDR Nano 3 SDRs. Each SDR is laboratory calibrated and EEPROM programmed for easy Stratux configuration The NESDR Nano 3 SDR is designed to avoid problems with USB port occlusion. You can install the SDRs side by side and back to back in almost any portable/embedded device, such as the Raspberry Pi 3, without the use of USB extension cables, removing the SDR board from the case or the like. hacks The NESDR Nano 3 SDRs are installed in aluminum enclosures to reduce EMI, improve performance and facilitate heat transfer from the PCB to the exterior of the device. The NESDR Nano 3 SDRs use a high-quality 0.5PPM TCXO. This ensures tuning stability even under extreme conditions Designed and assembled by NooElec in the United States. Full 2-year warranty on all bundle components › See more product details; Product description This dual band SDR package contains everything you need for a full DIY ADS-B installation. 2 NESDR Nano 3 SDRs are included. These SDRs include an R820T2 tuner along with an RTL2832U USB interface/demodulator. They also contain an extremely low phase noise of 0.5PPM TCXO. They have a frequency capacity of approximately 25MHz-1700MHz. The NESDR Nano 3 are very small, making them perfect for portable and embedded applications. The NESDR Nano 3 SDRs are installed in aluminum enclosures to reduce EMI, improve performance and facilitate heat transfer from the PCB to the exterior of the device. The NESDR Nano 3 SDR is designed to avoid problems with USB port occlusion. You can install the devices side by side and in a row in almost any portable/embedded device without the use of USB extension cables, removing the SDR board from the case or other such hacks. There are 2 antenna groups included. 1 small, medium gain for ultra-portable and cockpit applications and 1 medium high gain for portable and ground applications. Matching adapters and RF cables are included to allow different installation options. Each SDR is laboratory calibrated and serialized for easy Stratux installation. Each device comes with a calibration certificate with the calibration value and serial number, as well as a pair of adhesive labels that you can apply to the location of your choice for easy identification; Product description This dual band SDR package contains everything you need for a full DIY ADS-B installation. 2 NESDR Nano 3 SDRs are included. These SDRs include an R820T2 tuner along with an RTL2832U USB interface/demodulator. They also contain an extremely low phase noise of 0.5PPM TCXO. They have a frequency capacity of approximately 25MHz-1700MHz. The NESDR Nano 3 are very small, making them perfect for portable and embedded applications. The NESDR Nano 3 SDRs are installed in aluminum enclosures to reduce EMI, improve performance and facilitate heat transfer from the PCB to the exterior of the device. The NESDR Nano 3 SDR is designed to avoid problems with USB port occlusion. You can install the devices side by side and in a row in almost any portable/embedded device without the use of USB extension cables, removing the SDR board from the case or other such hacks. There are 2 antenna groups included. 1 small, medium gain for ultra-portable and cockpit applications and 1 medium high gain for portable and ground applications. Matching adapters and RF cables are included to allow different installation options. Each SDR is laboratory calibrated and serialized for easy Stratux installation. Each device comes with a calibration certificate with the calibration value and serial number, as well as a pair of adhesive labels that you can apply to the location of your choice for easy identification; This dual band SDR package contains everything you need for a full DIY ADS-B installation. 2 NESDR Nano 3 SDRs are included. These SDRs include an R820T2 tuner along with an RTL2832U USB interface/demodulator. They also contain an extremely low phase noise of 0.5PPM TCXO. They have a frequency capacity of approximately 25MHz-1700MHz. The NESDR Nano 3 are very small, making them perfect for portable and embedded applications. The NESDR Nano 3 SDRs are installed in aluminum enclosures to reduce EMI, improve performance and facilitate heat transfer from the PCB to the exterior of the device. The NESDR Nano 3 SDR is designed to avoid problems with USB port occlusion. You can install the devices side by side and in a row in almost any portable/embedded device without the use of USB extension cables, removing the SDR board from the case or other such hacks. There are 2 antenna groups included. 1 small, medium gain for ultra-portable and cockpit applications and 1 medium high gain for portable and ground applications. Matching adapters and RF cables are included to allow different installation options. Each SDR is laboratory calibrated and serialized for easy Stratux installation. Each device comes with a calibration certificate with the calibration value and serial number, as well as a pair of adhesive labels that you can apply to the location of your choice for easy identification