Description
Possibility of cold smoking - the use of the smoke generator allows cold smoking of fish, cheese and ripening meat products. Stainless steel design - the material from which the generator is made has an influence on its great resistance to corrosion, chemical detergents and various weather conditions. Removable pouring tube - thanks to it you will be able to clean the device thoroughly in a simple way. Easy to assemble and disassemble - all elements have been designed with the utmost care and fit together perfectly. A tube with a large capacity allows you to fill the generator with approx. 450 g smoking chips of any kind (however, we recommend chips with a degree of crushing of 8-12 mm, thanks to which an optimal amount of smoke is obtained). Such an amount of smoking chips allows smoking for a few hours without having to add smoking chips.; Product description This smoke generator is an auxiliary device for cold smoking as well as hot smoking / hot smoking in any smoker oven. Its application has excellent quality and yield of the process. The easy assembly and disassembly as well as the intuitive operation make smoking a pleasure. The set is added a black pump of 4 W with a power of 2 x 4.5 L/min or a green pump of 3.8 W and a power of 2 x 200 L/h. Your choice does not affect the function of the smoke generator. Which smoking method should I choose? Smoking methods: cold smoking - hot smoking / hot smoking - smoking with searing (characteristic of barbecue). Cold smoking: usually takes place at a temperature of 25C and lasts from a few hours to 14 days. Depending on your needs, a different amount of smoke is required. This smoking method is mainly used for products that are to be stored or ripened for a long time, as the smoke reaches deep into the product and preserves it slowly. Smoking products subjected to this smoking method dry evenly. Cold smoking also brings excellent results with long ripening time. Hot smoking / hot smoking: this is an effect on the product with smoke of a temperature of over 25⁰C. Here you can speak of two upper temperature limits. Smoking up to approx. 45⁰C is hot smoking and smoking up to 60⁰C is called hot smoking. In the case of hot smokers, we can fry the products directly in the smoker oven by setting the temperature in the smoker up to 80-90⁰C. increase. Smoking with searing: when searing we suggest turning off the smoke generator and only leave the temperature to work alone. Regardless of which smoking method you choose, please note that smoking is an end process and the appropriate preparation of the products for smoking and their very careful drying before smoking (possibly drying in the smoker oven) is fundamental so that the smoking products do not become acidic and are of good quality. Attention: Please make sure to place the nozzle of the generator through which the smoke is directed into the smoker so that the elongated opening in the nozzle is facing downwards. The notch on the boundary plate and the nub on the pouring tube will help you. After each smoking, clean the generator so that it is ready for use for the next use. If the generator is not cleaned, the smoke may flow through poorly. The set contains: - Lid with wooden handle; - Pouring tube made of 304 stainless steel; - Electric pump with a power of 3.8 W; - Two-piece nozzle of the generator, consisting of flue pipe and air pipe; - Silicone hose 5/4 mm with a length of 210 mm; - T-piece for joining the hoses; - Silicone hose 5/4 mm of a length of 820 mm. mm; - Adapter for the Joining the hoses; - silicone hose 8/5 mm with a length of 100 mm; - stainless base M8 - 4 ; - stainless screw M8x40 - 2 ; - stainless nut M8 - 2 dimensions: height of cylinder with lid 32 cm, height of the cylinder 29.2 cm, outer diameter: 10.1 cm, wall thickness 0.15 The kit may include a black or green pump that will be sent randomly. Despite small differences, the pumps perform the same function and do not affect the quality of use of the set.; Product description This smoke generator is an auxiliary device for cold smoking as well as hot smoking / hot smoking in any smoker oven. Its application has excellent quality and yield of the process. The easy assembly and disassembly as well as the intuitive operation make smoking a pleasure. The set is added a black pump of 4 W with a power of 2 x 4.5 L/min or a green pump of 3.8 W and a power of 2 x 200 L/h. Your choice does not affect the function of the smoke generator. Which smoking method should I choose? Smoking methods: cold smoking - hot smoking / hot smoking - smoking with searing (characteristic of barbecue). Cold smoking: usually takes place at a temperature of 25C and lasts from a few hours to 14 days. Depending on your needs, a different amount of smoke is required. This smoking method is mainly used for products that are to be stored or ripened for a long time, as the smoke reaches deep into the product and preserves it slowly. Smoking products subjected to this smoking method dry evenly. Cold smoking also brings excellent results with long ripening time. Hot smoking / hot smoking: this is an effect on the product with smoke of a temperature of over 25⁰C. Here you can speak of two upper temperature limits. Smoking up to approx. 45⁰C is hot smoking and smoking up to 60⁰C is called hot smoking. In the case of hot smokers, we can fry the products directly in the smoker oven by setting the temperature in the smoker up to 80-90⁰C. increase. Smoking with searing: when searing we suggest turning off the smoke generator and only leave the temperature to work alone. Regardless of which smoking method you choose, please note that smoking is an end process and the appropriate preparation of the products for smoking and their very careful drying before smoking (possibly drying in the smoker oven) is fundamental so that the smoking products do not become acidic and are of good quality. Attention: Please make sure to place the nozzle of the generator through which the smoke is directed into the smoker so that the elongated opening in the nozzle is facing downwards. The notch on the boundary plate and the nub on the pouring tube will help you. After each smoking, clean the generator so that it is ready for use for the next use. If the generator is not cleaned, the smoke may flow through poorly. The set contains: - Lid with wooden handle; - Pouring tube made of 304 stainless steel; - Electric pump with a power of 3.8 W; - Two-piece nozzle of the generator, consisting of flue pipe and air pipe; - Silicone hose 5/4 mm with a length of 210 mm; - T-piece for joining the hoses; - Silicone hose 5/4 mm of a length of 820 mm. mm; - Adapter for the Joining the hoses; - silicone hose 8/5 mm with a length of 100 mm; - stainless base M8 - 4 ; - stainless screw M8x40 - 2 ; - stainless nut M8 - 2 dimensions: height of cylinder with lid 32 cm, height of the cylinder 29.2 cm, outer diameter: 10.1 cm, wall thickness 0.15 The kit may include a black or green pump that will be sent randomly. Despite small differences, the pumps perform the same function and do not affect the quality of use of the set.; This smoke generator is an auxiliary device for cold smoking as well as hot smoking / hot smoking in any smoker oven. Its application has excellent quality and yield of the process. The easy assembly and disassembly as well as the intuitive operation make smoking a pleasure. The set is added a black pump of 4 W with a power of 2 x 4.5 L/min or a green pump of 3.8 W and a power of 2 x 200 L/h. Your choice does not affect the function of the smoke generator. Which smoking method should I choose? Smoking methods: cold smoking - hot smoking / hot smoking - smoking with searing (characteristic of barbecue). Cold smoking: usually takes place at a temperature of 25C and lasts from a few hours to 14 days. Depending on your needs, a different amount of smoke is required. This smoking method is mainly used for products that are to be stored or ripened for a long time, as the smoke reaches deep into the product and preserves it slowly. Smoking products subjected to this smoking method dry evenly. Cold smoking also brings excellent results with long ripening time. Hot smoking / hot smoking: this is an effect on the product with smoke of a temperature of over 25⁰C. Here you can speak of two upper temperature limits. Smoking up to approx. 45⁰C is hot smoking and smoking up to 60⁰C is called hot smoking. In the case of hot smokers, we can fry the products directly in the smoker oven by setting the temperature in the smoker up to 80-90⁰C. increase. Smoking with searing: when searing we suggest turning off the smoke generator and only leave the temperature to work alone. Regardless of which smoking method you choose, please note that smoking is an end process and the appropriate preparation of the products for smoking and their very careful drying before smoking (possibly drying in the smoker oven) is fundamental so that the smoking products do not become acidic and are of good quality. Attention: Please make sure to place the nozzle of the generator through which the smoke is directed into the smoker so that the elongated opening in the nozzle is facing downwards. The notch on the boundary plate and the nub on the pouring tube will help you. After each smoking, clean the generator so that it is ready for use for the next use. If the generator is not cleaned, the smoke may flow through poorly. The set contains: - Lid with wooden handle; - Pouring tube made of 304 stainless steel; - Electric pump with a power of 3.8 W; - Two-piece nozzle of the generator, consisting of flue pipe and air pipe; - Silicone hose 5/4 mm with a length of 210 mm; - T-piece for joining the hoses; - Silicone hose 5/4 mm of a length of 820 mm. mm; - Adapter for the Joining the hoses; - silicone hose 8/5 mm with a length of 100 mm; - stainless base M8 - 4 ; - stainless screw M8x40 - 2 ; - stainless nut M8 - 2 dimensions: height of cylinder with lid 32 cm, height of the cylinder 29.2 cm, outer diameter: 10.1 cm, wall thickness 0.15 The kit may include a black or green pump that will be sent randomly. Despite small differences, the pumps perform the same function and do not affect the quality of use of the set.
Product images are for illustrative purposes only, so the information they contain may differ from the product itself. Colors, notes, parameters, sizes, dimensions, functions, and/or any other characteristics of original products may differ from their actual appearance, so please refer to the product description in the product specifications. If you have any questions, please clarify by writing in an e-mail or by filling in the comments window when placing an order.
In the event that the order is made for a product regulated by law, Anete.lv, after evaluating the legal aspect of the order, has the right to refuse the order.
Warranty: 2 years 14-day refusal
Warranty: 2 years 14-day refusal
Warranty: 2 years 14-day refusal
Warranty: 2 years 14-day refusal
-12% Discount
Warranty: 2 years 14-day refusal
Traditional smokehouse
220.00€
/ pcs. 250.00€
0-1 Working Days
Availability 27
Product Code: ANW25DM
-50% Discount
Warranty: 2 years 14-day refusal
NHL Water Bottle 1000 ml
7.00€
/ pcs. 14.00€
0-1 Working Days
Availability 267
Product Code: NHL001
-8% Discount
High quality product Warranty: 2 years 14-day refusal Made in USA
Warranty: 2 years 14-day refusal
Robens Sheet Tarp 3 x 3m
137.51€
0-1 Working Days
Availability 14
Product Code: 5709388091161
Warranty: 2 years 14-day refusal
Coghlans Carabiner OBiner
1.65€
0-1 Working Days
Availability 104
Product Code: 056389007659