| This CNC kit contains: 1 x DM860I: digital stepper motor driver 2.4-7.2A 20-80VDC for Nema 34 stepper motor CNC drive 1 x 34HS39-6004S: Nema 34 stepper motor 8.0 Nm (1132.89 oz.in) 6.0 A 86 x 86 x 98 mm 4 wires 1 x S-350-60: 350W 60V 5.9A 115/230V switching power supply; Product description Engine specification: *Manufacturer Part Number: 34HS39-6004S *Number of phases: 2 *Step angle: 1.8 degrees. *Holding torque: 8.0Nm(1132.89ozin) *Rated current/phase: 6.0 A. *Phase resistance: 0.55 ohm ± 10%. *Inductance: 4.6mH ± 20% (1kHz) *Frame size: 86 x 86 mm. *Body length: 98 mm. *Shaft diameter: Φ14 mm. *Shaft length: 32 mm. *Shaft length of keywave: 25 mm. *Number of leads: 4 * Cable length: 500 mm. Driver specification: *Output peak current: 2.4-7.2A (6.0RMS). *Input voltage: +20~80VDC. *Logical signal current: 7-16mA (typical 10mA). *Pulse input frequency: 0-200kHz *Pulse width: 2.5μS *Insulation resistance: 100MΩ *Supports PUL/DIR and CW/CCW modes *Automatic no-load current reduction. *Suitable for 2-phase and 4-phase engines *Pulse input frequency up to 200 kHz, TTL compatible and optically isolated input *8 selectable peak currents, including 2.40A, 3.08A, 3.77A, 4.45A, 5.14A, 5.83A, 6.52A, 7.20A. *16 selectable microstep resolutions, including 400, 800, 1600, 3200, 6400, 12800, 25600, 51200, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 4000. 0 Performance specification: *60 VDC 5.9 A output. *AC input voltage range: 93-132V/176-264VAC *115V/230V AC selectable via switch. *High efficiency, low cost *Forced air cooling thanks to built-in DC fan. *Low output ripple and yaw movement. *Over current, over-voltage, short circuit and overheating protection. *215*115*50mm (L*W*H) connection A+:Black, A-:Green, B+:Red, B-:Blue; Product description Engine specification: *Manufacturer Part Number: 34HS39-6004S *Number of phases: 2 *Step angle: 1.8 degrees. *Holding torque: 8.0Nm(1132.89ozin) *Rated current/phase: 6.0 A. *Phase resistance: 0.55 ohm ± 10%. *Inductance: 4.6mH ± 20% (1kHz) *Frame size: 86 x 86 mm. *Body length: 98 mm. *Shaft diameter: Φ14 mm. *Shaft length: 32 mm. *Shaft length of keywave: 25 mm. *Number of leads: 4 * Cable length: 500 mm. Driver specification: *Output peak current: 2.4-7.2A (6.0RMS). *Input voltage: +20~80VDC. *Logical signal current: 7-16mA (typical 10mA). *Pulse input frequency: 0-200kHz *Pulse width: 2.5μS *Insulation resistance: 100MΩ *Supports PUL/DIR and CW/CCW modes *Automatic no-load current reduction. *Suitable for 2-phase and 4-phase engines *Pulse input frequency up to 200 kHz, TTL compatible and optically isolated input *8 selectable peak currents, including 2.40A, 3.08A, 3.77A, 4.45A, 5.14A, 5.83A, 6.52A, 7.20A. *16 selectable microstep resolutions, including 400, 800, 1600, 3200, 6400, 12800, 25600, 51200, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 4000. 0 Performance specification: *60 VDC 5.9 A output. *AC input voltage range: 93-132V/176-264VAC *115V/230V AC selectable via switch. *High efficiency, low cost *Forced air cooling thanks to built-in DC fan. *Low output ripple and yaw movement. *Over current, over-voltage, short circuit and overheating protection. *215*115*50mm (L*W*H) connection A+:Black, A-:Green, B+:Red, B-:Blue; Engine specification: *Manufacturer Part Number: 34HS39-6004S *Number of phases: 2 *Step angle: 1.8 degrees. *Holding torque: 8.0Nm(1132.89ozin) *Rated current/phase: 6.0 A. *Phase resistance: 0.55 ohm ± 10%. *Inductance: 4.6mH ± 20% (1kHz) *Frame size: 86 x 86 mm. *Body length: 98 mm. *Shaft diameter: Φ14 mm. *Shaft length: 32 mm. *Shaft length of keywave: 25 mm. *Number of leads: 4 * Cable length: 500 mm. Driver specification: *Output peak current: 2.4-7.2A (6.0RMS). *Input voltage: +20~80VDC. *Logical signal current: 7-16mA (typical 10mA). *Pulse input frequency: 0-200kHz *Pulse width: 2.5μS *Insulation resistance: 100MΩ *Supports PUL/DIR and CW/CCW modes *Automatic no-load current reduction. *Suitable for 2-phase and 4-phase engines *Pulse input frequency up to 200 kHz, TTL compatible and optically isolated input *8 selectable peak currents, including 2.40A, 3.08A, 3.77A, 4.45A, 5.14A, 5.83A, 6.52A, 7.20A. *16 selectable microstep resolutions, including 400, 800, 1600, 3200, 6400, 12800, 25600, 51200, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 4000. 0 Performance specification: *60 VDC 5.9 A output. *AC input voltage range: 93-132V/176-264VAC *115V/230V AC selectable via switch. *High efficiency, low cost *Forced air cooling thanks to built-in DC fan. *Low output ripple and yaw movement. *Over current, over-voltage, short circuit and overheating protection. *215*115*50mm (L*W*H) connection A+:Black, A-:Green, B+:Red, B-:Blue |
Product images are for illustrative purposes only, so the information they contain may differ from the product itself. Colors, notes, parameters, sizes, dimensions, functions, and/or any other characteristics of original products may differ from their actual appearance, so please refer to the product description in the product specifications. If you have any questions, please clarify by writing in an e-mail or by filling in the comments window when placing an order.
In the event that the order is made for a product regulated by law, Anete.lv, after evaluating the legal aspect of the order, has the right to refuse the order.
| Image | Product Name | Unit Price | Product Code | Availability | Quantity | |
|---|---|---|---|---|---|---|
|
E3D V6 All-Metal HotEnd - 1.75 mm - 12 V - Direct Drive | 142.81€ | ANEB07TXH3B5GT |
Delivery time 3-10 working days
Availability 10
|
||
|
Official Creality Ender 3 V3 Obxidian High Flow Nozzle Assembly for Creality K1C, Ender 3 V3, Ender 3 V3 Plus | 107.98€ | ANEB0D66KGXLDT |
Delivery time 3-10 working days
Availability 10
|
||
|
MALYAN Belt Printer Extension Roller Splice Bracket Set, Compatible with Malyan MA21 & SainSmart INFI-20 & Creality CR-30 | 102.22€ | ANEB0B8GWNXJJT |
Available to order
|
||
|
POLISI3D CR10 S5 Silicone Heating Pad 508x508mm 20x20 Heated Bed with 24 Holes for Creality CR-10 S5 3D Printer Large Print Bed Self Adhesive Back Sensor 220V | 231.81€ | ANEB08FXF88YBT |
Delivery time 3-10 working days
Availability 10
|
||
|
MKS TinyBee V1.0 3D Printer Board with MKS Mini12864 V3.0 Graphics LCD Screen 5pcs TMC2209 Stepper Motor Driver RGB Backlight Screen - DC12-24V | 118.46€ | ANEB0CP2S92P4T |
Delivery time 3-10 working days
Availability 10
|
| Image | Name | Unit Price | Product Code | Availability | Quantity | |
|---|---|---|---|---|---|---|
|
Spray gun for protective products with kit for body cavity applications (NHOU) |
280.00€
/ pcs. 309.00€
|
AH093016 |
0-1 Working Days
Availability 17
|
||
|
Traditional smokehouse |
220.00€
/ pcs. 250.00€
|
ANW25DM |
0-1 Working Days
Availability 29
|
||
|
NH oil coating for anti-rust treatment - set 400 ml x 6 |
100.00€
/ Package 107.00€
|
NHOUTransparentAm |
0-1 Working Days
Availability 12
|
||
|
NH oil coating for anti-rust treatment - black / aerosol - set 400ml x 3 + sprayer handle |
55.00€
/ Package 60.00€
|
NHOUTAMOUSE |
Available:
|
| Image | Name | Unit Price | Product Code | Availability | Quantity | |
|---|---|---|---|---|---|---|
|
Velo celīši THERMOFLEX 2 KneeWarmer M Black | 43.78€ | 8055688934965 |
0-1 Working Days
Availability 2
|
||
|
COPA PURE.2 League FG zābaki IG8716 / melni / 42 | 71.40€ | IG8716 |
Delivery time 3-10 working days
Availability 15
|
||
|
COPA PURE.2 League FG zābaki IG8716 / melni / 46 | 71.40€ | IG8716 |
Delivery time 3-10 working days
Availability 5
|
||
|
COPA PURE.2 League FG zābaki IG8716 / melni / 42 2/3 | 71.40€ | IG8716 |
Delivery time 3-10 working days
Availability 15
|
||
|
COPA PURE.2 League FG zābaki IG8716 / melni / 44 | 71.40€ | IG8716 |
Delivery time 3-10 working days
Availability 15
|
||
|
COPA PURE.2 League FG zābaki IG8716 / melni / 43 1/3 | 71.40€ | IG8716 |
Delivery time 3-10 working days
Availability 15
|
||
|
COPA PURE.2 League FG zābaki IG8716 / melni / 46 2/3 | 71.40€ | IG8716 |
Delivery time 3-10 working days
Availability 5
|
||
|
COPA PURE.2 League FG zābaki IG8716 / melni / 45 1/3 | 71.40€ | IG8716 |
Delivery time 3-10 working days
Availability 10
|
||
|
COPA PURE.2 League FG zābaki IG8716 / melni / 44 2/3 | 71.40€ | IG8716 |
Delivery time 3-10 working days
Availability 10
|
||
|
TOLEDO Jr 2403 TF apavi TOJS2403TF / tumši zila / 34 | 36.55€ | TOJS2403TF |
Delivery time 3-10 working days
Availability 2
|
||
|
TOLEDO Jr 2403 TF apavi TOJS2403TF / tumši zila / 35 | 36.55€ | TOJS2403TF |
Delivery time 3-10 working days
Availability 1
|
||
|
COPA PURE.2 League FG zābaki IG8716 / melni / 40 | 71.40€ | IG8716 |
Delivery time 3-10 working days
Availability 5
|
Anete.lv internet smart shop for active lifestyle supporters - HUGE selection of Sports, Tourism, Fishing goods for both professionals and amateurs at low prices straight from our warehouses!
GEMEX trading, SIA
Reģistrācijas numurs:
40103661189
Adrese:
Riga, Aleksandra Caka street 81, LV-1011
