Enertex KNX Smart Meter 85 A

3 Phasiger Zweiric Htungs counter for measuring of special active substances and reactive power Energy Meter the accuracy class 1 (1% for effective Blinde energy) The meter Werte recording to 32GB micro SD card Loss lose power measurement using external power sensors for measuring range from 2mA to 85 A toner cartridges. 3 calibrated of flow sensors (Rogow Ski Compartment) are included in box contents Representation of monitoring Rößen on the KNX bus (Eib): Special active substances and reactive power, effective Blinde energy, Voltage, Current, Power Factor last wrong, zero power, THD, Power Ober vibrations; Product description The KNX Smart Meter (4th top hat rail) is a Zweiric Htungs meter for measuring the effective blind Energy and Performance, as well as for analysing the USB31000SW USB 3.0 quality. The measurement is carried out either in the three phase system or in three independent Einphasen systems with the accuracy of class 1 (1%). In the accuracy class 1 according to EN 62053 – 11 are just accuracy requirements for the gauge between 2% and 100% of the rated stream. Can be fit into bore hole to reduce to smaller currents will not requirements defined, not exact as the standard cable (Ct. In contrast the Enertex Smart M, precision power used sensors (calibrated Rogow skis reels for), in the factory in to your device. This means that very small currents to 0.002% of the nominal stream (= 2mA) precise are visible. Also features is the power measurement particularly low (<2 m loss). Use the included power sensors are suitable for wall mounting and may not be directly at the mains at the Einspeise point be installed. The smart meter is supplied by using the bus. So it can be the device itself time currents and voltages, when there is on the voltage inputs No 230 V voltage meter or measure the voltage has been unlocked. The measuring range of the active power stretches from 0.5 W up to 19.550 W or 58.650 W (three). Energy value and measuring Rößen For Monitoring The Power Quality are for analysis on a SD card inserted in text form recorded. All measured values (current, voltage, active power, reactive power, active energy, blindfold Energy, Power Factor, THD, THD I, mesh upper vibrations, last, zero power, wrong power supply Frequency) are on the KNX Bus shown in the pictures.; Product description The KNX Smart Meter (4th top hat rail) is a Zweiric Htungs meter for measuring the effective blind Energy and Performance, as well as for analysing the USB31000SW USB 3.0 quality. The measurement is carried out either in the three phase system or in three independent Einphasen systems with the accuracy of class 1 (1%). In the accuracy class 1 according to EN 62053 – 11 are just accuracy requirements for the gauge between 2% and 100% of the rated stream. Can be fit into bore hole to reduce to smaller currents will not requirements defined, not exact as the standard cable (Ct. In contrast the Enertex Smart M, precision power used sensors (calibrated Rogow skis reels for), in the factory in to your device. This means that very small currents to 0.002% of the nominal stream (= 2mA) precise are visible. Also features is the power measurement particularly low (<2 m loss). Use the included power sensors are suitable for wall mounting and may not be directly at the mains at the Einspeise point be installed. The smart meter is supplied by using the bus. So it can be the device itself time currents and voltages, when there is on the voltage inputs No 230 V voltage meter or measure the voltage has been unlocked. The measuring range of the active power stretches from 0.5 W up to 19.550 W or 58.650 W (three). Energy value and measuring Rößen For Monitoring The Power Quality are for analysis on a SD card inserted in text form recorded. All measured values (current, voltage, active power, reactive power, active energy, blindfold Energy, Power Factor, THD, THD I, mesh upper vibrations, last, zero power, wrong power supply Frequency) are on the KNX Bus shown in the pictures.; The KNX Smart Meter (4th top hat rail) is a Zweiric Htungs meter for measuring the effective blind Energy and Performance, as well as for analysing the USB31000SW USB 3.0 quality. The measurement is carried out either in the three phase system or in three independent Einphasen systems with the accuracy of class 1 (1%). In the accuracy class 1 according to EN 62053 – 11 are just accuracy requirements for the gauge between 2% and 100% of the rated stream. Can be fit into bore hole to reduce to smaller currents will not requirements defined, not exact as the standard cable (Ct. In contrast the Enertex Smart M, precision power used sensors (calibrated Rogow skis reels for), in the factory in to your device. This means that very small currents to 0.002% of the nominal stream (= 2mA) precise are visible. Also features is the power measurement particularly low (<2 m loss). Use the included power sensors are suitable for wall mounting and may not be directly at the mains at the Einspeise point be installed. The smart meter is supplied by using the bus. So it can be the device itself time currents and voltages, when there is on the voltage inputs No 230 V voltage meter or measure the voltage has been unlocked. The measuring range of the active power stretches from 0.5 W up to 19.550 W or 58.650 W (three). Energy value and measuring Rößen For Monitoring The Power Quality are for analysis on a SD card inserted in text form recorded. All measured values (current, voltage, active power, reactive power, active energy, blindfold Energy, Power Factor, THD, THD I, mesh upper vibrations, last, zero power, wrong power supply Frequency) are on the KNX Bus shown in the pictures.

Product images are for illustrative purposes only, so the information they contain may differ from the product itself. Colors, notes, parameters, sizes, dimensions, functions, and/or any other characteristics of original products may differ from their actual appearance, so please refer to the product description in the product specifications. If you have any questions, please clarify by writing in an e-mail or by filling in the comments window when placing an order.

In the event that the order is made for a product regulated by law, Anete.lv, after evaluating the legal aspect of the order, has the right to refuse the order.