ElecGear EL-80P M.2 2280 SSD dzesētājs, siltuma caurule + divstāvu dzesētāja alumīnija radiators 80 mm PCIe NVMe un SATA iekšējam spēļu SSD ar termiskiem spilventiņiem

[Double Heatsink] - The SSD cooler has two layers of aluminum heat sink decks connected by 4 high-end 4mm heat pipes. The heat generated by M.2 2280 SSD is absorbed by the heat pipe and effectively directed to both the upper and lower heat sink. A drop of 12 to 25 degrees Celsius is expected. NVMe and SATA M.2 SSD are supported. Suitable for PCIE 4.0 Gen4 NVMe [High-end Heatpipe] - The cooler features a 4 x 4 mm heat pipe that is seamlessly embedded into the two layers of the solid aluminium heat sink. The passive design without fan ensures absolute noiselessness. The heat sink is the ultimate cooling solution for heat management of 2280 SSD [Thermal Pads] - Pack of 2 thermal pads for excellent heat dissipation. High performance at 4.8W/m-k The pre-divided small pads are designed to be glued to the main control IC and memory chips, while the large one-sided pad is to be placed on the U-shaped centre frame, pointing against the bottom of the SSD [Compatibility Notice] - The cooler only fits NVMe and SATA SSD in 80mm M.2 form factor. The memory can be single-sided or double-sided Please make sure your desktop PC has enough space to accommodate this kit: the minimum width is at least 25.5 mm / 1.01 inch and 26 mm / 1.03 inch height above the SSD [What is in the package] - 1 x ElecGear EL-80P SSD heat sink, 1 x small thermal pads for IC chips (pre-divided in blue), 1 x thermal pad for the SSD back (one-sided grey), screws and screwdriver; Product description ✔ 2 x layers of aluminium heatink decks. ✔ 4 x high performance 4 mm heat pipes. ✔ 2 x high-end silicone thermal pads. ✔ Fits M.2 SSD in 2280 form factor. ✔ Ready for PCIE 4.0 Gen4 NVMe. ✔ Product size: 89 L x 25.5 W x 28.5 H mm. ✔ Product weight: 120 g. The heatsink is the ultimate cooling solution to heat management of M.2 2280 SSD. Features two layers of aluminum heatsink decks linked by 4 high-end 4mm heat pipes. The heat pipes effectively transfer the heat from M.2 SSD to both layers of heatsink. High performance thermal pads applied onto both sides of SSD for excellent heat dissipation. 12 to 25 degrees Celsius drop is expected. Your memory will never be over-heated again. NVMe and SATA in 2280 form factor are supported. [Compatibility Note] 1.Fits NVMe and SATA SSD in 80mm M.2 form factor alone. 2230, 2242 and 2260 are not supported. 2. The memory can be single-sided or double-sided. 3.Please make sure your desktop PC has enough space to accommodate the kit: Minimum width is more than 25.5 mm / 1.01 inches. Minimum height is more than 26 mm / 1.03 inch above the SSD. [Packaging] 1 x ElecGear EL-80P SSD Heatsink. 10 x thermal pads for memory chips (pre-divided blue). 1 x thermal pad for SSD back side (single-sided grey). 1 x PH00 screwdriver. 1 x screw set.; Product description ✔ 2 x layers of aluminium heatink decks. ✔ 4 x high performance 4 mm heat pipes. ✔ 2 x high-end silicone thermal pads. ✔ Fits M.2 SSD in 2280 form factor. ✔ Ready for PCIE 4.0 Gen4 NVMe. ✔ Product size: 89 L x 25.5 W x 28.5 H mm. ✔ Product weight: 120 g. The heatsink is the ultimate cooling solution to heat management of M.2 2280 SSD. Features two layers of aluminum heatsink decks linked by 4 high-end 4mm heat pipes. The heat pipes effectively transfer the heat from M.2 SSD to both layers of heatsink. High performance thermal pads applied onto both sides of SSD for excellent heat dissipation. 12 to 25 degrees Celsius drop is expected. Your memory will never be over-heated again. NVMe and SATA in 2280 form factor are supported. [Compatibility Note] 1.Fits NVMe and SATA SSD in 80mm M.2 form factor alone. 2230, 2242 and 2260 are not supported. 2. The memory can be single-sided or double-sided. 3.Please make sure your desktop PC has enough space to accommodate the kit: Minimum width is more than 25.5 mm / 1.01 inches. Minimum height is more than 26 mm / 1.03 inch above the SSD. [Packaging] 1 x ElecGear EL-80P SSD Heatsink. 10 x thermal pads for memory chips (pre-divided blue). 1 x thermal pad for SSD back side (single-sided grey). 1 x PH00 screwdriver. 1 x screw set.; ✔ 2 x layers of aluminium heatink decks. ✔ 4 x high performance 4 mm heat pipes. ✔ 2 x high-end silicone thermal pads. ✔ Fits M.2 SSD in 2280 form factor. ✔ Ready for PCIE 4.0 Gen4 NVMe. ✔ Product size: 89 L x 25.5 W x 28.5 H mm. ✔ Product weight: 120 g. The heatsink is the ultimate cooling solution to heat management of M.2 2280 SSD. Features two layers of aluminum heatsink decks linked by 4 high-end 4mm heat pipes. The heat pipes effectively transfer the heat from M.2 SSD to both layers of heatsink. High performance thermal pads applied onto both sides of SSD for excellent heat dissipation. 12 to 25 degrees Celsius drop is expected. Your memory will never be over-heated again. NVMe and SATA in 2280 form factor are supported. [Compatibility Note] 1.Fits NVMe and SATA SSD in 80mm M.2 form factor alone. 2230, 2242 and 2260 are not supported. 2. The memory can be single-sided or double-sided. 3.Please make sure your desktop PC has enough space to accommodate the kit: Minimum width is more than 25.5 mm / 1.01 inches. Minimum height is more than 26 mm / 1.03 inch above the SSD. [Packaging] 1 x ElecGear EL-80P SSD Heatsink. 10 x thermal pads for memory chips (pre-divided blue). 1 x thermal pad for SSD back side (single-sided grey). 1 x PH00 screwdriver. 1 x screw set.

Product images are for illustrative purposes only, so the information they contain may differ from the product itself. Colors, notes, parameters, sizes, dimensions, functions, and/or any other characteristics of original products may differ from their actual appearance, so please refer to the product description in the product specifications. If you have any questions, please clarify by writing in an e-mail or by filling in the comments window when placing an order.

In the event that the order is made for a product regulated by law, Anete.lv, after evaluating the legal aspect of the order, has the right to refuse the order.