RATTMMOTOR 2 in 1 CNC 3018 Pro Max Milling and Engraving Machine with 5.5 W 5500 mW Laser Module, 420 x 350 x 270 mm, 3 Axis GRBL, Control ER11 10000 rpm for PVC PCB Wood Carving DIY Engraver Milling

CNC 3018 Pro Max milling machine: this 2-in-1 CNC 3018 Pro Max has 5.5 W 5500 mW power module and 775 spindle motor. Newly designed handwheels + integrated driver chip + fixed heat sink + external fan + robust housing to extend the life of the control panel, self-sufficient short circuit protection, not easy to damage. Offline controller support: 1. No need to connect the computer. 2. 1GB large capacity, including SD card reader to write to root directory G code files or NC files. 3. Adjust the position of the X, Y and Z axis manually as the engraving start point, open or close the spindle manually. 4. Automatically identify whether the control is done by the computer. Technical data: standard GRBL control, can be factory mounted 300 x 180 x 45 mm with 775 spindle motor (12-36 V) 24 V: 10,000 rpm; control software: GRBL, function header: 5.5 W 5500 mW power module Easy to install: core components mounted. Installation is significantly facilitated by clear assembly instructions and software and the setup takes only about 20 minutes, supports Windows XP, Win7, Win 8, Win 10 (32/64 systems. The instructions are on the USB stick), does not support Apple product Versatile use: with the laser engraving machine, all types of plastics, soft aluminium, wood, acrylic, PVC, PCB etc. can be engraved. However, cutting or engraving carbide, jade or other hard materials with the laser cutter is prohibited. Stainless steel items need to be › See more product details; Product description Products include: 1 x 5.5 W laser module, 445 Nm (with protective glasses). 1 x CNC 3018 Pro Max, 3 axis laser engraving machine kit (self-assembly). 1 x GRBL1.1 control board. 1 x spindle with ER11 with collet 10 x sharp knives with flat bottom. 1 x U disc. 1 x offline control handle. 1 x assembly instructions. Control board function: 1. GRBL1.1f firmware, stable performance. 2. Offline Engraving (Optional Offline Module) 4. Support 2P / 3P function header, PWM / TTL signal control, power 0-100% adjustable. 5. Spindle support PWM power 0-100% adjustable. 6. Step current overcurrent protection to avoid damage, DRV8825 drive, better performance than the A4988. 7. The function header is imported directly into the image sculpture, without programming, without design, simple and convenient. Technical data: Software: GRBL control systems. Engraving machine supports Windows XP, Windows 7, Windows 8 (32/64 bit), cannot support Windows 10 / Windows 11 (32/64 bit) and Linux. The machine cannot work with Apple products. Effective engraving area: 300 x 180 x 45 mm. Frame size: 42 x 35 x 27 cm. Functional header: 5.5 W. Frame material: PF + aluminium. Spindle: 775 spindle motor, (12-36V) 24V, 10000rpm. Stepper motor: 1.3A, 12V, 0.25Nm torque Drill bit: 10 pieces of cutters, tip 0.1 mm, 20 degrees, diameter 3.175 mm. Clamps: 4 pieces, hold the thickness of 0-30 mm. This machine set is dismountable, must be assembled by the customer himself, requires certain electronic and mechanical basics.; Product description Products include: 1 x 5.5 W laser module, 445 Nm (with protective glasses). 1 x CNC 3018 Pro Max, 3 axis laser engraving machine kit (self-assembly). 1 x GRBL1.1 control board. 1 x spindle with ER11 with collet 10 x sharp knives with flat bottom. 1 x U disc. 1 x offline control handle. 1 x assembly instructions. Control board function: 1. GRBL1.1f firmware, stable performance. 2. Offline Engraving (Optional Offline Module) 4. Support 2P / 3P function header, PWM / TTL signal control, power 0-100% adjustable. 5. Spindle support PWM power 0-100% adjustable. 6. Step current overcurrent protection to avoid damage, DRV8825 drive, better performance than the A4988. 7. The function header is imported directly into the image sculpture, without programming, without design, simple and convenient. Technical data: Software: GRBL control systems. Engraving machine supports Windows XP, Windows 7, Windows 8 (32/64 bit), cannot support Windows 10 / Windows 11 (32/64 bit) and Linux. The machine cannot work with Apple products. Effective engraving area: 300 x 180 x 45 mm. Frame size: 42 x 35 x 27 cm. Functional header: 5.5 W. Frame material: PF + aluminium. Spindle: 775 spindle motor, (12-36V) 24V, 10000rpm. Stepper motor: 1.3A, 12V, 0.25Nm torque Drill bit: 10 pieces of cutters, tip 0.1 mm, 20 degrees, diameter 3.175 mm. Clamps: 4 pieces, hold the thickness of 0-30 mm. This machine set is dismountable, must be assembled by the customer himself, requires certain electronic and mechanical basics.; Products include: 1 x 5.5 W laser module, 445 Nm (with protective glasses). 1 x CNC 3018 Pro Max, 3 axis laser engraving machine kit (self-assembly). 1 x GRBL1.1 control board. 1 x spindle with ER11 with collet 10 x sharp knives with flat bottom. 1 x U disc. 1 x offline control handle. 1 x assembly instructions. Control board function: 1. GRBL1.1f firmware, stable performance. 2. Offline Engraving (Optional Offline Module) 4. Support 2P / 3P function header, PWM / TTL signal control, power 0-100% adjustable. 5. Spindle support PWM power 0-100% adjustable. 6. Step current overcurrent protection to avoid damage, DRV8825 drive, better performance than the A4988. 7. The function header is imported directly into the image sculpture, without programming, without design, simple and convenient. Technical data: Software: GRBL control systems. Engraving machine supports Windows XP, Windows 7, Windows 8 (32/64 bit), cannot support Windows 10 / Windows 11 (32/64 bit) and Linux. The machine cannot work with Apple products. Effective engraving area: 300 x 180 x 45 mm. Frame size: 42 x 35 x 27 cm. Functional header: 5.5 W. Frame material: PF + aluminium. Spindle: 775 spindle motor, (12-36V) 24V, 10000rpm. Stepper motor: 1.3A, 12V, 0.25Nm torque Drill bit: 10 pieces of cutters, tip 0.1 mm, 20 degrees, diameter 3.175 mm. Clamps: 4 pieces, hold the thickness of 0-30 mm. This machine set is dismountable, must be assembled by the customer himself, requires certain electronic and mechanical basics.

Product images are for illustrative purposes only, so the information they contain may differ from the product itself. Colors, notes, parameters, sizes, dimensions, functions, and/or any other characteristics of original products may differ from their actual appearance, so please refer to the product description in the product specifications. If you have any questions, please clarify by writing in an e-mail or by filling in the comments window when placing an order.

In the event that the order is made for a product regulated by law, Anete.lv, after evaluating the legal aspect of the order, has the right to refuse the order.