Nobsound Little Bear T11 6N2/12AX7 Vacuum & Valve Tube Phono Turntable Preamplifier; MM RIAA LP Vinyl Record Player Preamp; Stereo HiFi Audio Pre-Amplifier; Turntable Preamp

Availability: Available to order

ID: 5272568

Product Code: ANEB0759DXRJBT

296.17€

(Ex Tax: 244.77€)

Informacija

Description

Little Bear T11 is a pure tube phono preamp that only works with MM cartridge turntables. Please make sure your turntable is equipped with a PHONO signal output instead of a LINE output. The little bear T11 is based on T10 with improvement. Compared to T10, T11 has lower background noise at normal volume. Its sound performance is better with increased vibrancy. Adopting a conventional active RIAA equalization phono step circuit. There are 3 metal covers and 4 acrylic covers for these pipes. And you will be able to choose what kind you want. Supports 6N2 / 12AX7 tubes, which provides many interchangeable tubes for you such as 6H2,6H2n (for 6N2 type) and 12AX7B, 6N4 (9PIN), ECC83,5751 (for 12AX7 type). On the bottom of the description, there are a few Q&A for buyers who might meet the buzzing problem. If you encounter a similar problem, please check these tips that have covered most conditions.; Product description Technical data: Output voltage: 2.0 V. Gain = 48 dB. Input RIAA ≤ 5mV. THD ≤ 0.5%. Frequency Response: Standard Character Signal-to-noise ratio ≥ 65dB (A) 1KHz (input: 10mV; output: 0.7V). Package contents: 1 x preamplifier. 1 x 6Z4 tube. 3 x 6N2 tubes. 3 x metal tube covers. 4 x acrylic tube covers. 1 x power cable. 1 x GND wire. Q & A: Q: I have a loud buzz with T11. A: First we need to clarify that all phono preamps have some background noise and a little loud is normal. We list some reasons that can cause loud noises. Reason A: T11 is not well connected to ground. While the device plays music, you can pick up the GND copper part of T11 with your fingers. If the background noise is much lower, T11 is not connected to the ground. For this problem, we have prepared a 3 m wire in the package for you to solve it yourself. Simply use it to connect the GND to any large mental element in your home such as windows or mental tables. Reason B: T11 does not match your amplifier well. Digital amplifiers cannot be directly connected to the ground, which can lead to T11 a lot of noise. For this problem, you can simply set the T11 GND Switch (on the back) to OFF. However, this will lead to bad noise from T11 itself as it is not connected to the ground. You can only choose the bearable way. Therefore, we recommend using professional HiFi amplifiers (no Bluetooth is better). Reason C: The RCA wire is bad and has no anti-jamming magnetic ring.; Product description Technical data: Output voltage: 2.0 V. Gain = 48 dB. Input RIAA ≤ 5mV. THD ≤ 0.5%. Frequency Response: Standard Character Signal-to-noise ratio ≥ 65dB (A) 1KHz (input: 10mV; output: 0.7V). Package contents: 1 x preamplifier. 1 x 6Z4 tube. 3 x 6N2 tubes. 3 x metal tube covers. 4 x acrylic tube covers. 1 x power cable. 1 x GND wire. Q & A: Q: I have a loud buzz with T11. A: First we need to clarify that all phono preamps have some background noise and a little loud is normal. We list some reasons that can cause loud noises. Reason A: T11 is not well connected to ground. While the device plays music, you can pick up the GND copper part of T11 with your fingers. If the background noise is much lower, T11 is not connected to the ground. For this problem, we have prepared a 3 m wire in the package for you to solve it yourself. Simply use it to connect the GND to any large mental element in your home such as windows or mental tables. Reason B: T11 does not match your amplifier well. Digital amplifiers cannot be directly connected to the ground, which can lead to T11 a lot of noise. For this problem, you can simply set the T11 GND Switch (on the back) to OFF. However, this will lead to bad noise from T11 itself as it is not connected to the ground. You can only choose the bearable way. Therefore, we recommend using professional HiFi amplifiers (no Bluetooth is better). Reason C: The RCA wire is bad and has no anti-jamming magnetic ring.; Technical data: Output voltage: 2.0 V. Gain = 48 dB. Input RIAA ≤ 5mV. THD ≤ 0.5%. Frequency Response: Standard Character Signal-to-noise ratio ≥ 65dB (A) 1KHz (input: 10mV; output: 0.7V). Package contents: 1 x preamplifier. 1 x 6Z4 tube. 3 x 6N2 tubes. 3 x metal tube covers. 4 x acrylic tube covers. 1 x power cable. 1 x GND wire. Q & A: Q: I have a loud buzz with T11. A: First we need to clarify that all phono preamps have some background noise and a little loud is normal. We list some reasons that can cause loud noises. Reason A: T11 is not well connected to ground. While the device plays music, you can pick up the GND copper part of T11 with your fingers. If the background noise is much lower, T11 is not connected to the ground. For this problem, we have prepared a 3 m wire in the package for you to solve it yourself. Simply use it to connect the GND to any large mental element in your home such as windows or mental tables. Reason B: T11 does not match your amplifier well. Digital amplifiers cannot be directly connected to the ground, which can lead to T11 a lot of noise. For this problem, you can simply set the T11 GND Switch (on the back) to OFF. However, this will lead to bad noise from T11 itself as it is not connected to the ground. You can only choose the bearable way. Therefore, we recommend using professional HiFi amplifiers (no Bluetooth is better). Reason C: The RCA wire is bad and has no anti-jamming magnetic ring.

Product images are illustrative

Product images are for illustrative purposes only, so the information they contain may differ from the product itself. Colors, notes, parameters, sizes, dimensions, functions, and/or any other characteristics of original products may differ from their actual appearance, so please refer to the product description in the product specifications. If you have any questions, please clarify by writing in an e-mail or by filling in the comments window when placing an order.

Product Name	Unit Price	Product Code	Availability
Ultra Low Noise Amplifier, LNA Module for RF Software Defined Radio, 0.1MHz to 6GHz Full Band 20dB High Gain Power Preamplifier Module for Sdrplay 1A (Comes with Built-in Battery)	72.19€	ANE55B0BZ4TPVYFT	Available to order
3337# Divvirzienu 150 W skaļruņu skapis ar krosoveri	14.62€	3337#	Delivery time 3-10 working days Availability 11
Denon AV Receiver, Hi-Fi Amplifier, Alexa Compatible, 6 HDMI Inputs and 2 Outputs, 8K Video, Bluetooth, WiFi, Music Streaming, Dolby Atmos, AirPlay 2, HEOS Multiroom	1,462.16€	ANEB089QLDCH7T	Delivery time 3-10 working days Availability 10
Pyle Verstärker, Verstärker Hifi Stereo, Buetooth Verstärker, Amplifier, Mini Stereo Receiver, 200W Mehrkanal mit HDMI, Optisch/Phono/Koazial, UKW Radio, USB/SD/AUX/RCA, Mic- Eingang mit Fernbedienung	198.03€	ANEB0DFMVB15CT	Delivery time 3-10 working days Availability 10
2623# antenas pastiprinātājs lna-177-5g 30db hfo oriģināls	13.51€	2623#	Delivery time 3-10 working days Availability 94

Good offers View more

Name	Unit Price	Product Code	Availability	Quantity
Spray gun for protective products with kit for body cavity applications (NHOU)	280.00€ / pcs. 309.00€	AH093016	0-1 Working Days Availability 14	/ pcs.
Traditional smokehouse	220.00€ / pcs. 250.00€	ANW25DM	0-1 Working Days Availability 26	/ pcs.
NH oil coating for anti-rust treatment - set 1000 ml x 3	110.00€ / Package 116.00€	NHOUSETAm	0-1 Working Days Availability 55	/ Package
NH oil coating for anti-rust treatment - set 400 ml x 6	100.00€ / Package 107.00€	NHOUTransparentAm	0-1 Working Days Availability 8	/ Package

Spray gun for protective products with kit for body cavity applications (NHOU)

280.00€ / pcs. 309.00€

0-1 Working Days
Availability 14

Product Code: AH093016

Traditional smokehouse

220.00€ / pcs. 250.00€

0-1 Working Days
Availability 26

Product Code: ANW25DM

NH oil coating for anti-rust treatment - set 1000 ml x 3

110.00€ / Package 116.00€

0-1 Working Days
Availability 55

Product Code: NHOUSETAm

NH oil coating for anti-rust treatment - set 400 ml x 6

100.00€ / Package 107.00€

0-1 Working Days
Availability 8

Product Code: NHOUTransparentAm

Customers choose View more

Name	Unit Price	Product Code	Availability	Quantity
NH oil coating for anti-rust treatment - black - 208L	4,900.00€ / pcs.	NHOUBlack1l	0-1 Working Days Availability 1181	/ pcs.
NH oil coating for anti-rust treatment - transparent - 208L	4,700.00€ / pcs.	NHOUTRANSP1l	0-1 Working Days Availability 1190	/ pcs.
NH oil coating for anti-rust treatment - Black 20l	540.00€ / pcs.	NHOUBlack	0-1 Working Days Availability 263	/ pcs.
NH oil coating for anti-rust treatment - transparent 5l, 20l	532.00€ / pcs.	NHOUTransparent	0-1 Working Days Availability 263	/ pcs.
NH oil coating for anti-rust treatment - black / aerosol - 400ml x 12pics	215.99€ / Package	NHOUBlackAC	0-1 Working Days Availability 1184	/ Package
NH oil coating for anti-rust treatment - transparent / aerosol - 400ml x 12pics	203.99€ / Package	NHOUTransparentAC	0-1 Working Days Availability 1243	/ Package
Spray gun for protective products with kit for body cavity applications (NHOU)	280.00€ / pcs. 309.00€	AH093016	0-1 Working Days Availability 14	/ pcs.
Spray gun (NHOU) - 500 mm stroke	24.00€ / pcs.	spraygun500mm	0-1 Working Days Availability 23	/ pcs.
spray can handle	6.00€	NHOU150102	0-1 Working Days Availability 15
NH oil coating for anti-rust treatment - transparent - 1000ml (MC)	37.99€ / pcs.	NHOUTRANSP1l	0-1 Working Days Availability 1175	/ pcs.
NH oil coating for anti-rust treatment - black - 1000ml (MC)	38.99€ / pcs.	NHOUBlack1l	0-1 Working Days Availability 144	/ pcs.
NH oil coating for anti-rust treatment - black / aerosol - 400ml	17.99€ / pcs.	NHOUBlackA	0-1 Working Days Availability 1451	/ pcs.